SWDC series Dream-Color Flexible RGB LED Strip-Strip Modules Source

Category:

Description

SWDC series Dream-Color Flexible RGB LED Strip

Beam Pattern100 degreeColorRGBCurrent Draw2445mACurrent Draw per Foot149mAIP RatingWaterproof IP67Number of LEDs in Unit160 LEDsLED Type5050 SMDLEDs per Segment160Length500cm(197in)Lifetime40000 HoursLumen400 LumenLumen Per Foot24 lm/ftLumen Per LED2.5MCD per Foot10854MCD Per LED1114Millicandela[1]178200mcdPrice Per Foot$8.49Strip Width16mmSuitable for VehiclesNoTotal Power Consumption12.2 WattsTypeFlexible Light StripsOperating Voltage Range5 VDCWattage per Foot0.8 WattsWavelength470 nm/525 nm/626 nmWire Length50.8cm(20in)Dimensions: 502cm(197.64″) x 1.6cm(0.63″) x 0.55cm(0.22″)

Product Specifications

Applications: Color selection, change, and chase with speed, direction and length control for accent lighting
Function:Control SWDC-RGB series Light Strips using controller unit or RF remote
Operating Voltage: 12 Volts DC (use included 12VDC 1A Compact Power Supply)
Connection Mode: Common Anode (+)
Output: 2 SPI signals
Maximum Load Current:
Output Power:
Static Power Consumption: 2.2 Watts
Overall Size: (L)94 X (W)58 X (H)26 mm
Control Method: 6 button on Controller Unit or wireless RF Remote Control
Batteries Required:23A, 12V battery for Remote (included)
Modes:83 Color chasing or changing
Operating Temperature:-25~60°C
USER MANUAL (pdf):Click here User Manual

Typical Wiring Schematic

RGB-DC83: 12VDC Dream Color RGB LED Controller

The model RGB-DC83 controller is designed to be used with the SWDC-RGB series Silicone Enlcosed RGB Flexible Light Strip. Control the sequence mode, chase legnth, and speed of 83 different dynamic chasing patterns from the RF Remote Controller or directly on the RGB Controller unit. The Dream-Color systems controls each RGB LED in the strip independently.

NOTES:

1.)VERY IMPORTANT: Supply voltage for Controller is 12 Volts DC, power with included 12VDC Power Supply, do not exceed

2.)VERY IMPORTANT: Supply voltage for SWDC-RGB series Light Strips is 5 Volts DC, 12 Volts will destroy the SWDC-RGB series LED Strip

3.) Connect according to the drawing below.
4.) + (plus) and – (minus) #IC buttons will only work when unit is off.
5.) Each Controller has a handheld Remote matched to it and will only work with it’s matched remote. One remote cannot operate multiple controllers.
6.) Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the Strips have to connect with an amplifier to reinforce the transmission of signal.
7.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
8.) Strip can be trimmed down to length by cutting it every 2 LEDs. If this is done waterproofing accessories are required on end that was cut.

Dimensions in millimeters (inches)

  • HIGH EFFICIENCY, LOW WORKING TEMPERATURE
  • SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED
  • COMPACT SIZE, LIGHT WEIGHT
  • 100% FULL LOAD BURN-IN TEST
  • LOW COST, HIGH RELIABILITY
LED Installation accessories
PURCHASE FROM ‘POWER SUPPLIES’ TAB15 watt30 watt?
SPECIFICATIONSWPS-5VDC-15WWPS-5VDC-25W?
PRICE
$12.95
$19.95
?
WATERPROOF RATINGIP67IP67?
DC OUTPUT VOLTAGE5V5V?
OUTPUT V. TOLERANCE±0.5V±0.5V?
OUTPUT RATED CURRENT3.0A (3000ma)5.0A (5000ma)?
MAX NO. OF SWDC-RGB160 5M STRIPS12?
To determine how many LED products can be connected to a power supply:
divide the total current capability of the power supply by the current draw of the LED product
OUTPUT CURRENT RANGE0-3.0A0-5.0A?
DC OUTPUT POWER15W25W?
INPUT VOLTAGE RANGE90~250VAC90~130VAC?
WEIGHT210g260g?
WORKING TEMP., HUMIDITY-10°C~+60°C, 20%~90% RH
STORAGE TEMP., HUMIDITY-20°C~+85°C, 10%~95% RH
SAFETY STANDARDCE APPROVED