SWDC series Dream-Color Flexible RGB LED Strip-LED Flexible Strip

SWDC series Dream-Color Flexible RGB LED Strip

Beam Pattern 100 degree Color RGB Current Draw 2445mA Current Draw per Foot 149mA IP Rating Waterproof IP67 Number of LEDs in Unit 160 LEDs LED Type 5050 SMD LEDs per Segment 160 Length 500cm(197in) Lifetime 40000 Hours Lumen 400 Lumen Lumen Per Foot 24 lm/ft Lumen Per LED 2.5 MCD per Foot 10854 MCD Per LED 1114 Millicandela[1] 178200mcd Price Per Foot $8.49 Strip Width 16mm Suitable for Vehicles No Total Power Consumption 12.2 Watts Type Flexible Light Strips Operating Voltage Range 5 VDC Wattage per Foot 0.8 Watts Wavelength 470 nm/525 nm/626 nm Wire Length 50.8cm(20in) Dimensions: 502cm(197.64″) x 1.6cm(0.63″) x 0.55cm(0.22″)

Product Specifications

Applications: Color selection, change, and chase with speed, direction and length control for accent lighting
Function: Control SWDC-RGB series Light Strips using controller unit or RF remote
Operating Voltage: 12 Volts DC (use included 12VDC 1A Compact Power Supply)
Connection Mode: Common Anode (+)
Output: 2 SPI signals
Maximum Load Current:
Output Power:
Static Power Consumption: 2.2 Watts
Overall Size: (L)94 X (W)58 X (H)26 mm
Control Method: 6 button on Controller Unit or wireless RF Remote Control
Batteries Required: 23A, 12V battery for Remote (included)
Modes: 83 Color chasing or changing
Operating Temperature: -25~60°C
USER MANUAL (pdf): Click here User Manual

Typical Wiring Schematic

RGB-DC83: 12VDC Dream Color RGB LED Controller

The model RGB-DC83 controller is designed to be used with the SWDC-RGB series Silicone Enlcosed RGB Flexible Light Strip. Control the sequence mode, chase legnth, and speed of 83 different dynamic chasing patterns from the RF Remote Controller or directly on the RGB Controller unit. The Dream-Color systems controls each RGB LED in the strip independently.

NOTES:

1.)VERY IMPORTANT: Supply voltage for Controller is 12 Volts DC, power with included 12VDC Power Supply, do not exceed

2.)VERY IMPORTANT: Supply voltage for SWDC-RGB series Light Strips is 5 Volts DC, 12 Volts will destroy the SWDC-RGB series LED Strip

3.) Connect according to the drawing below.
4.) + (plus) and – (minus) #IC buttons will only work when unit is off.
5.) Each Controller has a handheld Remote matched to it and will only work with it’s matched remote. One remote cannot operate multiple controllers.
6.) Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the Strips have to connect with an amplifier to reinforce the transmission of signal.
7.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
8.) Strip can be trimmed down to length by cutting it every 2 LEDs. If this is done waterproofing accessories are required on end that was cut.

Dimensions in millimeters (inches)

  • HIGH EFFICIENCY, LOW WORKING TEMPERATURE
  • SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED
  • COMPACT SIZE, LIGHT WEIGHT
  • 100% FULL LOAD BURN-IN TEST
  • LOW COST, HIGH RELIABILITY
LED Installation accessories
PURCHASE FROM ‘POWER SUPPLIES’ TAB 15 watt 30 watt ?
SPECIFICATIONS WPS-5VDC-15W WPS-5VDC-25W ?
PRICE
$12.95
$19.95
?
WATERPROOF RATING IP67 IP67 ?
DC OUTPUT VOLTAGE 5V 5V ?
OUTPUT V. TOLERANCE ±0.5V ±0.5V ?
OUTPUT RATED CURRENT 3.0A (3000ma) 5.0A (5000ma) ?
MAX NO. OF SWDC-RGB160 5M STRIPS 1 2 ?
To determine how many LED products can be connected to a power supply:
divide the total current capability of the power supply by the current draw of the LED product
OUTPUT CURRENT RANGE 0-3.0A 0-5.0A ?
DC OUTPUT POWER 15W 25W ?
INPUT VOLTAGE RANGE 90~250VAC 90~130VAC ?
WEIGHT 210g 260g ?
WORKING TEMP., HUMIDITY -10°C~+60°C, 20%~90% RH
STORAGE TEMP., HUMIDITY -20°C~+85°C, 10%~95% RH
SAFETY STANDARD CE APPROVED