Description
MCB-RGB4-CPS Mini RGB Controller – CPS
| Applications:? | Specific color selection or color change with speed control modes and dimming capabilities for accent lighting |
| Function: | Dim and control 3 channel RGB LED products from 15~100% using PWM with controller unit |
| Operating Voltage:?? | 5~24 Volts DC |
| Connection Mode:?? | Common anode (+) |
| Output:? | 1 channel RGB |
| Maximum Load Current:?? | 4 Amps |
| Output Power:? | 48W @ 12V / 96W @ 24V |
| Overall Size:? | (L)37 x (W)13 x (H)4 mm |
| Control Method:? | Controller buttons (no remote) |
| Modes: | 39 total (20 static and 19 dynamic) |
| Operating Temperature: | -25~60°C |
The model MCB-RGB4 is a Mini RGB controller with function buttons on board to control and dim any of our Red/Green/Blue (RGB) LED Light Bars and Light Strips. Several different static colors (including pure white) and dynamic color changing modes are selectable and adjustable using the buttons on the RGB controller.
NOTES:
1.) Only power with 5~24VDC power supply.
2.) QUICK and SLOW speed buttons will only work when unit is in one of the color changing (dynamic) modes.
3.) Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 meters of additional LED Strips.
4.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
Mode List
| Static Colors: (Select “COLOR”) ? | Dynamic Color Changing: (Select “MODE”) | ||
| 1. Blue | 11. Orange | 1. Random | 11. Tri-color instant change |
| 2. Green | 12. Yellow | 2. Seven-color fade | 12. Seven-color instant change |
| 3. Red | 13. Lime Green | 3. Tri-color crossfade | 13. Tri-color strobe |
| 4. Ultra-Violet Blue | 14. Aqua | 4. Seven-color crossfade | 14. Blue strobe |
| 5. Light Blue | 15. Sky Blue | 5. Blue fade in/out | 15. Aqua strobe |
| 6. Indigo | 16. Pure White | 6. Aqua fade in/out | 16. Green strobe |
| 7. Purple | 17. Cool White | 7. Green fade in/out | 17. Red strobe |
| 8. Light Purple | 18. Super Cool White | 8. Yellow fade in/out | 18. White strobe |
| 9. Magenta | 19. Blue White | 9. Red fade in/out | 19. Seven-color strobe |
| 10. Coral | 20. Deep Blue | 10. White fade in/out | ? |
| RGB Light Bars & Strips | Universal RGB Controllers and Dimmers Numbers below represent the maximum number of units the controller can drive without the use of RGB amplifiers | RGB Amplifiers Numbers below represent the maximum number of units the Amplifier can drive | Product | Current Draw @ 12 Volt DC | Product Length | Max Run* | MCB-RGB4-CPS | RGB-A4 | RGB-WA4 | MRGB-A4 | MRGB-A4-CPS | RGBW-A6 |
|---|---|---|---|---|---|---|---|---|---|
| RGB-1-DI | 230ma | 0.305m (1ft) | 20 | 52 | 52 | 52 | 52 | 52 | 104 |
| NFLS-RGB15-DI | 202ma | 0.5m (1.6ft) | 20 | 59 | 59 | 59 | 59 | 59 | 118 |
| NFLS-RGB30-DI | 404ma | 1m (3.3ft) | 10 | 29 | 29 | 29 | 29 | 29 | 59 |
| NFLS-RGB150-DI | 1855ma | 5m (16.4ft) | 2 | 6 | 6 | 6 | 6 | 6 | 12 |
| NFLS-RGB150X2 | 3295ma | 5m (16.4ft) | 1 | 3 | 3 | 3 | 3 | 3 | 7 |
| NFLS-RGB150-KIT | 1970ma | 5m (16.4ft) | 2 | 6 | 6 | 6 | 6 | 6 | 12 |
| NFLS-RGB30X2-WHT | 808ma | 1m (3.3ft) | 5 | 14 | 14 | 14 | 14 | 14 | 29 |
| NFLS-RGBNW300X3-WHT | 4700ma | 5m (16.4ft) | 1 | 2 | 2 | 2 | 2 | 2 | 5 |
| NFLS-RGBWW300X3-WHT | 3750ma | 5m (16.4ft) | 1 | 3 | 3 | 3 | 3 | 3 | 6 |
| * Maximum number of light bars in one run (end to end) – for higher quantities, multiple runs back to the power supply, controller, or amplifier must be made to prevent excessive voltage drop Note: To determine the maximum number of any LED products on a single Power Supply – divide the total current capability of the power supply by the current draw of the LED product – then multiply that number by 0.8 (for 80% capacity) | |||||||||
