MCB-RGB4-CPS Mini RGB Controller - CPS-Strip Modules Source

MCB-RGB4-CPS Mini RGB Controller – CPS

Applications:? Specific color selection or color change with speed control modes and dimming capabilities for accent lighting
Function: Dim and control 3 channel RGB LED products from 15~100% using PWM with controller unit
Operating Voltage:?? 5~24 Volts DC
Connection Mode:?? Common anode (+)
Output:? 1 channel RGB
Maximum Load Current:?? 4 Amps
Output Power:? 48W @ 12V / 96W @ 24V
Overall Size:? (L)37 x (W)13 x (H)4 mm
Control Method:? Controller buttons (no remote)
Modes: 39 total (20 static and 19 dynamic)
Operating Temperature: -25~60°C
MCB-RGB4: 12VDC Mini RGB LED Controller with CPS Connector

The model MCB-RGB4 is a Mini RGB controller with function buttons on board to control and dim any of our Red/Green/Blue (RGB) LED Light Bars and Light Strips. Several different static colors (including pure white) and dynamic color changing modes are selectable and adjustable using the buttons on the RGB controller.

NOTES:

1.) Only power with 5~24VDC power supply.
2.) QUICK and SLOW speed buttons will only work when unit is in one of the color changing (dynamic) modes.
3.) Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 meters of additional LED Strips.
4.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.

Mode List

Static Colors:
(Select “COLOR”) ?
Dynamic Color Changing:
(Select “MODE”)
1. Blue 11. Orange 1. Random 11. Tri-color instant change
2. Green 12. Yellow 2. Seven-color fade 12. Seven-color instant change
3. Red 13. Lime Green 3. Tri-color crossfade 13. Tri-color strobe
4. Ultra-Violet Blue 14. Aqua 4. Seven-color crossfade 14. Blue strobe
5. Light Blue 15. Sky Blue 5. Blue fade in/out 15. Aqua strobe
6. Indigo 16. Pure White 6. Aqua fade in/out 16. Green strobe
7. Purple 17. Cool White 7. Green fade in/out 17. Red strobe
8. Light Purple 18. Super Cool White 8. Yellow fade in/out 18. White strobe
9. Magenta 19. Blue White 9. Red fade in/out 19. Seven-color strobe
10. Coral 20. Deep Blue 10. White fade in/out ?
RGB Light Bars & Strips Universal RGB Controllers and Dimmers
Numbers below represent the maximum number of units the controller can drive without the use of RGB amplifiers
RGB Amplifiers
Numbers below represent the maximum number of units the Amplifier can drive
Product Current Draw @ 12 Volt DC Product Length Max Run* MCB-RGB4-CPS RGB-A4 RGB-WA4 MRGB-A4 MRGB-A4-CPS RGBW-A6
RGB-1-DI 230ma 0.305m (1ft) 20 52 52 52 52 52 104
NFLS-RGB15-DI 202ma 0.5m (1.6ft) 20 59 59 59 59 59 118
NFLS-RGB30-DI 404ma 1m (3.3ft) 10 29 29 29 29 29 59
NFLS-RGB150-DI 1855ma 5m (16.4ft) 2 6 6 6 6 6 12
NFLS-RGB150X2 3295ma 5m (16.4ft) 1 3 3 3 3 3 7
NFLS-RGB150-KIT 1970ma 5m (16.4ft) 2 6 6 6 6 6 12
NFLS-RGB30X2-WHT 808ma 1m (3.3ft) 5 14 14 14 14 14 29
NFLS-RGBNW300X3-WHT 4700ma 5m (16.4ft) 1 2 2 2 2 2 5
NFLS-RGBWW300X3-WHT 3750ma 5m (16.4ft) 1 3 3 3 3 3 6
* Maximum number of light bars in one run (end to end) – for higher quantities, multiple runs back to the power supply, controller, or amplifier must be made to prevent excessive voltage drop Note: To determine the maximum number of any LED products on a single Power Supply – divide the total current capability of the power supply by the current draw of the LED product – then multiply that number by 0.8 (for 80% capacity)