High Power RGB LED Flexible Light Strips – NFLS-RGBX2-Strip Modules Source

Beam Pattern 180 degree
Color RGB
Water Resistance[1] Non-Weatherproof
LED Type 5050 SMD
LEDs per Segment 3
Lifetime 40000 Hours
Lumen (Max) 4020 Lumen
Lumen Per Foot 244 lm/ft
Lumen Per LED 13.4
Lumen MCD Per Foot 38972
MCD Per LED 2132
Polarized Yes
Strip Width 10.15mm
Suitable for Vehicles Yes
Type Flexible Light Strips/High Density
Operating Voltage Range 9~14.8 VDC
Wavelength 470 nm/525 nm/626 nm
Wire Length 22.8cm(9in)

All specifications are subject to change without notice
1. IP65 – Product will incur no harmful effects from light water projection.
IP66 – Product will incur no harmful effects from heavy water projection.
IP67 – Product will incur no harmful effects from being submerged up to 1 meter for no more than 30 minutes.
IP68 – Product will incur no harmful effects from being submerged beyond 1 meter.

Part NO	Number of LEDs in Unit	Total Length	CCT / Wavelength ^[1]	Intensity	Radiant Power	Current Draw per Foot @ 12 Volts DC ^[2]	Current Draw @ 12 Volts DC ^[3]	Max Run ^[4]	CRI	Price
NFLS-RGB150X2	300	500.00cm (16.40ft)	470/525/626 nm	4020 lm	–	201 mA (2.4 W)	3295 mA	1	–	(Discontinued)
NFLS-RGB15X2-WHT	30	50.00cm (1.64ft)	470/525/626 nm	402 lm	–	248 mA (3 W)	404 mA	10	–	$24.95
NFLS-RGB30X2-WHT	60	100.00cm (3.28ft)	470/525/626 nm	804 lm	–	248 mA (3 W)	808 mA	5	–	$49.95
NFLS-RGB15X2-BK	30	50.00cm (1.64ft)	470/525/626 nm	402 lm	–	248 mA (3 W)	404 mA	10	–	$24.95
NFLS-RGB30X2-BK	60	100.00cm (3.28ft)	470/525/626 nm	804 lm	–	248 mA (3 W)	808 mA	5	–	$49.95
NFLS-RGB150X2-WHT	300	500.00cm (16.40ft)	470/525/626 nm	4020 lm	–	201 mA (2.4 W)	3295 mA	1	–	$149.95
NFLS-RGB150X2-BK	300	500.00cm (16.40ft)	470/525/626 nm	4020 lm	–	201 mA (2.4 W)	3295 mA	1	–	(Discontinued)

1. White LED Note: Correlated Color Temperature measured in Kelvin, higher numbers indicate blue/purple tint (similar to HID lamps), standard incandescent bulbs are around 3000K
2. Maximum current is based on maximum intensity of all circuits(Bright White).
3. Maximum current is based on maximum intensity of all circuits(Bright White).
4. Maximum number of units in one run (end to end) – for higher quantities, multiple runs back to the power supply must be made to prevent excessive voltage drop

All specifications are subject to change without notice