Description
外置大功率调光电源 External Dimmable LED Driver High Power
DALI3W-D10300(3X1W Dimmable driver)
<!–
–>
1. Isolated AC/DC offline 100Vac / 230Vac.2. Intelligent wall dimmer detection: Leading-edge dimmer, Trailing-edge dimmer No-dimmer, Dimmer types: R, R-C, R-L
3. Wide dimming range from 2% up to 100%.4. Small-size design.5. Resonant control to achieve high efficiency 85%.
==========================================================================================================================================
<!–
–>
It is especially designed for LED ceiling lamps, tug lamps and so on; It use the traditional adjustable silicome to realize 20 MA(3%-100%) start current for dimming.
Features:
Universal AC input and full range
Protections: OCP and SCP
Driving 1 pcs 3W LEDs in series
Dielectric strength: 3750V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light
Technical data:
Power: 3W
Input voltage range: 100-240V AC
Frequency: 50 to 60Hz
Power factor: 0.65(typical)
Power efficiency: 75%
Output voltage: 2 to 5 V DC
Output current: 600mA (typical value), 630mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
MTBF calculation: up to 50,000 hours lifetime
Weight: 30g (plastic housing)
==========================================================================================================================================
1.Input voltage: 100-240V 2.Output voltage: 5-11V 3.Output current: 300mA 4.Power: 3W PF: 0.65 Efficiency: 75% 5.Dimension L37*W21*H26mm
Inner and high stable IC will control and avoid current swift; The unstable phenomenon would be overcome because of temperature arise
Universal AC input and full range
Protections: OCP and SCP
Driving 3 pcs 1W LEDs in series
Dielectric strength: 3750V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light
Technical data:
Power: 3W
Input voltage range: 100-240V AC
Frequency: 50 to 60Hz
Power factor: 0.65(typical)
Power efficiency: 75%
Output voltage: 5 to 11 V DC
Output current: 300mA (typical value), 315mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
plastic housing
Weight: 30g
==========================================================================================================================================
<!–
–>
1.Input voltage: 110/230V 2.Output voltage: 12-20V 3.Output current: 300mA 4.Power: 4-7W PF: 0.82 Efficiency: 78% 5.Dimension: L65*W35*H23mm
It is especially designed for LED ceiling lamp and tug lamp; It use the traditional adjustable silicome to adjust current to for current dimming.
Features:
Universal AC input and full range
Protections: OCP and SCP
Driving 4 or 7 pcs 1W LEDs in series
Dielectric strength: 3750V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light LED lights
Technical data:
Power: 4-7W
Input voltage range: 110/230V AC
Frequency: 50 or 60Hz
Power factor: 0.82 (typical)
Power efficiency: 78%
Output voltage: 12 to 20 V DC
Output current: 300mA (typical value), 315mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 70g
==========================================================================================================================================
<!–
–>
This model compatiable with most brands dimmer; It is the best LED power driver dimmer at market at the present.
Features:
Protections: OCP and SCP
Driving 4 or 3 pcs 3W LEDs in series
Dielectric strength: 3750V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light LED lights
Technical data:
Power: 7W
Input voltage range: 110/230V AC
Frequency: 50 or 60Hz
Power factor: 0.82 (typical)
Power efficiency: 78%
Output voltage: 6 to 11 V DC
Output current: 600mA (typical value), 630mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 70g
==========================================================================================================================================
1.Input voltage: 110/230V 2.Output voltage: 6-11V 3.Output current: 500mA 4.Power: 7W PF: 0.82 Efficiency: 78% 5.Dimension: L65*W35*H23mm
Imported IC and high quality electronic components will stabilizse and control current; Passed with CE/FCC/UL/GS/CSA certificates,compatiable with most brands dimmer.
Features:
Protections: OCP and SCP
Driving 2 or 3 pcs 2W LEDs in series
Dielectric strength: 3750V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light LED lights
Technical data:
Power: 7W
Input voltage range: 110/230V AC
Frequency: 50 or 60Hz
Power factor: 0.82 (typical)
Power efficiency: 78%
Output voltage: 6 to 11 V DC
Output current: 500mA (typical value), 525mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 70g
==========================================================================================================================================
<!–
–>
1.Input voltage: 220-240V 2.Output voltage: 18-35V 3.Output current: 300mA 4.Power: 6-10W PF: 0.85 Efficiency:80% 5.Dimension: L88*W39*H23mm
This product is especially designed for LED ceiling lamp and tug lamp; It use the traditional adjustable silicome to adjust current for dimming.
Features:
Universal AC input and full range
Protections: OCP and SCP
Driving 6 or 10 pcs 1W LEDs in series
Dielectric strength: 3.75kV AC, leakage current 5mA, 60 seconds
Built-in isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light LED lights
Technical data:
Power: 6-10W
Input voltage range: 110/230V AC
Frequency: 50 or 60Hz
Power factor: 0.85 (typical)
Power efficiency: 80%
Output voltage: 18 to 35V DC
Output current: 300mA (typical value), 330mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Weight: 80g (plastic housing)
==========================================================================================================================================
1.Input voltage: 220-240V 2.Output voltage: 6-14V 3.Output current: 500mA 4.Power: 10W PF: 0.85 Efficiency: 80% 5.Dimension: L88*W39*H23mm
Imported IC and high quality electronic components will stabilze quality and adjust current.
Features:
Protections: OCP and SCP
Driving 2 or 4 pcs 2W LEDs in series
Dielectric strength: 1.5kV AC, leakage current 5mA, 60 seconds
Built-in isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light LED lights
Technical data:
Power: 10W
Input voltage range: 220-240V AC
Frequency: 50 or 60Hz
Power factor: 0.85 (typical)
Power efficiency: 80%
Output voltage: 6 to 14V DC
Output current: 500mA (typical value), 525mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 80g
==========================================================================================================================================
1.Input voltage: 220-240V 2.Output voltage: 6-11V 3.Output current: 600mA 4.Power: 10W PF: 0.85 Efficiency: 80% 5.Dimension: L88*W39*H23mm
The great character is that it has very good compatiability and application effects. NXP 2101 proposal .
Protections: OCP and SCP
Driving 2 or 3 pcs 3W LEDs in series
Dielectric strength: 3.75kV AC, leakage current 5mA, 60 seconds
Built-in isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light LED lights
Technical data:
Power: 10W
Input voltage range: 220-240V AC
Frequency: 50 or 60Hz
Power factor: 0.85 (typical)
Power efficiency: 80%
Output voltage: 6 to 11V DC
Output current: 600mA (typical value), 630mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 80g
==========================================================================================================================================
<!–
–>
1.Input voltage: 220-240V 2.Output voltage: 50-70V 3.Output current: 300mA 4.Power: 16-25W PF: 0.85 Efficiency: 82% 5.Dimension: L140*W45*H28mm
It is especially designed for LED ceiling lamp, tug lamp, LED tube lamps, flat lamps, Grill lamps, Spot lamps. It can use the traditional silicone to adjust current for diming.
Features:
Universal AC input and full range
Protections: OCP and SCP
Driving 16 to 25 pcs 1W LEDs in series
Dielectric strength: 3.75V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light ,tube light, spotlight, Grille lamp LED lights
Technical data:
Power: 16-25W
Input voltage range: 220-240V AC
Frequency: 50 or 60Hz
Power factor: 0.85 (typical)
Power efficiency: 82%
Output voltage: 50 to 70V DC
Output current: 300mA (typical value), 330mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 120g
==========================================================================================================================================
1.Input voltage: 220-240V 2.Output voltage: 21-36V 3.Output current: 700mA 4.Power: 25W PF: 0.85 Efficiency: 82% 5.Dimension: L140*W45*H28mm
Imported IC and high quality electronic components will stabilize quality and adjust current; Passed withCE/FCC/UL/GS/CSA certificates.
Features:
Universal AC input and full range
Protections: OCP and SCP
Driving 7 to 10 pcs 3W LEDs in series
Dielectric strength: 3.75V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light ,tube light, spotlight, Grille lamp LED lights
Technical data:
Power: 22W
Input voltage range: 220-240V AC
Frequency: 50 or 60Hz
Power factor: 0.85 (typical)
Power efficiency: 82%
Output voltage: 21 to 36V DC
Output current: 700mA (typical value), 740mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 120g
==========================================================================================================================================
1.Input voltage: 220-240V 2.Output voltage: 25-40V 3.Output current: 500mA 4.Power: 25W PF: 0.85 Efficiency: 82% 5.Dimension: L140*W45*H28mm
Compatiable with most brands dimmer; It is one of the best LED power driver with good compatiability. IW3612 proposal.
Features:
Universal AC input and full range
Protections: OCP and SCP
Driving 8 to 12 pcs 2W LEDs in series
Dielectric strength: 3750V AC, leakage current 5mA, 60 seconds
isolated constant current LED drivers
Low-noise and environment-friendly
Use highly efficient, steady and low-loss switch control chip
Burn-in test: 100% for at least 4 hours under working temperature of 40°C
Application: Ceiling light, Down light ,tube light, spotlight, Grille lamp LED lights
Technical data:
Power: 22W
Input voltage range: 220-240V AC
Frequency: 50 or 60Hz
Power factor: 0.85 (typical)
Power efficiency: 82%
Output voltage: 25 to 40V DC
Output current: 500mA (typical value), 525mA (maximum)
Operating temperature: -40 to 65°C
Humidity: 35 to 80% RH
Naked PCB or plastic housing
Weight: 120g
============================================================================================================================================================
Lighting/ Auto Parts/ Forging/ Die Casting/ Molding/ OEM Order
Engineer/ Solution / Inquiry@ Tony
Focus & Contact US: [email protected] Tel. +86-1373-8879-104 www.ledsolarwind.com
============================================================================================================================================================
联系人Manager: TonyZhu朱 (Inquiry/Engineer/Solution) Lighting/Auto Parts/Modling/Forging/Die Casting/ OEM
欢迎咨询 报价，工程技术，应用解决方案
手机Tel: +86-1373-8879-104 电话Tel: +86-574-88603009 传真Fax:0574-8860-3005
| NINGBOBE-WELL LIGHTING&ENERGY TECHNOLOGY CO.,LTD 宁波博煌光能科技音像公司 | ||||||||
| Factory Address:# ZhenbeiRoad,Shangtian Town,Fenghua Ningbo City,China/315500 中国。宁波。奉化尚田镇 镇北路5号 | ||||||||
| 邮箱Email:[email protected]otmail.com 网址Web: www.ledsolarwind.com 更多产品图片More Pictures Http://tonyindustry.v.yupoo.com |